For best results, BODY COOLER® should be
placed flat in cool tap water. Let stand for 10 to 20 minutes if more soaking needed check frequently for capacity. The BODY COOLER® will expand to approximately
1/2" in thickness. Remove from the water and dry with a towel.
To completely dry the outside fabric, hang to dry it may take up to an hour. BODY
COOLER® will stay cool for days. Do not over soak as it will
only add weight and in some cases cause seams to burst. A good idea is to set a timer and check on status periodically.
Using Your Body Cooler®
Each BODY COOLER® is designed to be worn
on a specific part of the body and is made in sections so the polymer
will stay in place. If the BODY COOLER® begins to feel warm
simply turn it over to increase the cooling sensation. If more cooling
is desired the item can be put in a plastic bag and flash frozen about 20 min in freezer; be sure the outside fabric is dry before freezing.
When BODY COOLER® shows signs of de-hydrating,
after a few days of use, simply re-soak following the original instructions.
BODY COOLER® IS NON-TOXIC.
Washing And Care Instructions
Hand wash in a mild soap, rinse thoroughly
and hang to dry. In case of smells or stain a white vinegar can be added to water for washing. SHOULD NOT BE MACHINE WASHED OR DRIED IN THE DRYER.
Be sure you clean after each use. When not in use or for long storage,
it should ALWAYS be hung in a well ventilated area. It will return
to its original crystals in 3 to 8 days, depending on the temperature
and humidity.
Warming Products
Do not put the product
in a microwave oven.
Hand wash with a sponge or soft cloth.
Pet Warming Mat - Warming Pet Mat - WPM-01
Inside the warm pet mat we used NU-Foam and
an aluminum from NASA spin off technology. NU-Foam is washable,
resists mildew and retains permanent shape. There is an outer cover
made of 100% cotton flannel with zipper.
